Working from the mantra of “refinement until simplicity is achieved”, this new design takes a striking 15 degree angle from the table’s edge to the ground. Subtle leg details are apparent but it’s the pure strength of design that speaks most clearly.

No compromise is made with materials. The table pictured is solid Tasmanian plantation blackwood but you can also choose from American Oak or Walnut.

The table is finished with deep penetrating Natural Burnishing Oil. No tricks are used to achieve the fine surface, just many hours of sanding and polishing. The surface can be repaired if damaged and little maintenance is required.

Designer

Justin Hutchinson for Design Refinery

Dimensions

2400 long / 1000 wide / 740 high

Price

American Walnut $6,250

Tasmanian Plantation Blackwood and American Oak $5,950

Hoop Pine Ply and Veneer Top $5,850

Working from the mantra of “refinement until simplicity is achieved", the Refinery Daybed is a simple and discerning piece.

The daybed has a frame constructed from solid hardwood with subtle angles and the elegant design highlights the quality and craftsmanship of it's timber construction.

The button-upholstered mattress is supported by timber slats for durable support. Custom selected mattress upholstery fabric available.

Design

Justin Hutchinson for Design Refinery

Size and price

2200 L x 850 W x 450 H - $4,250 (plus cost of fabric)
1800 L x 850 W x 450 H - $3,950 (plus cost of fabric)

A sleek, low sideboard with crisp lines and hard edges. Can be used to house electronic components in open sections or fitted with drawers to house your CD or DVD collection. Overall the unit is at just the right height for your flat-screen TV. The cabinet itself is crafted from sustainable hoop-pine ply with walnut, oak or maple veneer and hand-finished in Scandinavian Oil. The ply edges are visible from the side and front to show the character of the material. The legs are splayed both fore and aft to accentuate the angles of the piece and are formed with a unique timber and steel sandwich design.

Designer
Design Refinery (Melb)

Material
Hoop pine plywood and timber veneer body (walnut, oak or maple) on a steel and timber base.

Options
Extra drawers available to $350 each

Sizes and Price
1200L x 366H x 502D - $3,650
1800L x 366H x 502D - $4,450
2200L x 366H x 502D - $4,950

A sleek, angled coffee table with crisp lines and hard edges. The table is crafted from sustainable hoop-pine ply with walnut, oak or maple veneer and given a durable 2 pack finish. The legs are splayed both fore and aft to accentuate the angles of the piece and are formed with a unique timber and steel sandwich design.

Designer
Design Refinery (Melb)

Material
Hoop pine plywood and timber veneer top (walnut, oak or maple) on a steel and timber base

Options
Walnut, Oak, Maple

Sizes and Price
1200L x 244H x 502D - $1,750
1800L x 244H x 502D - $1,950
2200L x 244H x 502D - $2,250

A modular cabinet system designed with flexibility in mind. 

As a single piece, it makes an ideal entertainment unit with two soft-closing drawers to contain you CD and DVD collection. The height is perfect for TV viewing from your favourite chair. Add another unit alongside and you have room for your Hi-Fi and record player, plus extra storage.

If you decide the you need somewhere to store clothes, stack two or three units on top of each other and you have a handsome chest of drawers.

Design

Justin Hutchinson for Design Refinery

Size

900 L x 450 W x 600 H

Price

Screen printed hoop pine ply - $1,200

Strand woven bamboo ply - $1,550

A sleek, low sideboard with crisp lines and hard edges. Can be used to house electronic components in open sections or fitted with drawers to house your CD or DVD collection. Overall the unit is at just the right height for your flat-screen TV. 

The cabinet itself is crafted from sustainable hoop-pine plywood and hand-finished in Scandinavian Oil. Edges are rounded off to show the material and natural imperfections are celebrated. The legs are splayed both fore and aft to accentuate the angles of the piece and are formed with a unique timber and steel sandwich design.

Designer
Design Refinery (Melb)

Shadows of Darkness graphics by Tim Fleming

Material
Hoop pine plywood body with unique screen-print design by Tim Fleming on a steel and timber base.

Options
Extra drawers available to $350 each

Sizes and Price
1200L x 366H x 502D - $3,650
1800L x 366H x 502D - $4,450
2200L x 366H x 502D - $4,950

Designer 

Design Refinery (Melb)

Graphics 

Tim Fleming (Melb)

Material 

Hoop pine plywood with textured laminate, steel and timber base

Options 

Top laminate in red, black or white

Rocking Recliner

Designer

David Trubridge

Material

Laminated American Ash (indoor use)

Laminated New Zealand Red Beech (indoor/outdoor)

Size

550 H x 2370 L x 625 D

Price

POA

Rocking Recliner for indoor or occasional outdoor use

Designer

David Trubridge

Material

Steam-bent American Ash/Hoop Pine Plywood, Stainless Steel Screws

Size

600 H x 2370 L x 625 D

Price

POA

Feature Bench Seat.

Designer
David Trubridge

Material
American Ash and Hoop Pine Plywood, New Zealand Red Beech and Keruing plywood. Stainless Steel Screws

Size
Height 430mm
Length 2150mm
Depth 950mm

Price
POA

Feature Seat

Designer

David Trubridge

Material

American Ash and Hoop Pine Plywood, New Zealand Red Beech and Keruing Plywood, Stainless Steel Screws

Size

Height 720

Length 1540

Depth 1150

Price

POA

Wooden Rocking Chair

Designer
David Trubridge

Material
American Ash and Hoop Pine plywood, New Zealand Red Beech and Keruing plywood. Natural Oil Finish available

Size
Height 850
Length 930
Depth 560

Price

POA

Ruth - Rocking Chair

Flip - Stool that flips over to become the occasional table.

Deisgner

David Trubridge (NZ)

Material

American Ash and Hoop Pine Plywood, New Zealand Red Beech and Keruing Plywood

Size 

Flip -

Height 320

Length 670

Depth 400

Ruth -

Height 850
Length 940
Depth 580

Price

POA

This standing sideboard is refined simplicity. The quality, birch plywood material is celebrated with exposed edges while the finger-jointed corners speak of craftsmanship.

With a combination of opening doors and drawers, it's practical storage for modern living. The drawers are deep enough for CDs and DVD's and the 2 door cupboard has an adjustable, (or removable) shelf.

Designer
John and Coby (Melb)

Materials
Birch plywood with your choice of Oak, Walnut or Maple veneer

Dimensions
1775 L x 400 D x 640 H

Price
$3,950

This wall-mounted sideboard is an incredibly flexible piece of furniture. It can be positioned low to support a flatscreen TV, higher to become a wall- mounted desk with storage or higher still as a practical hall table. Ideal for limited space or just changing needs. 

Designer
John and Coby (Melb)

Materials
Birch plywood with your choice of Oak, Walnut or Maple veneer

Price

1200L - $1,950

1800L - $2,750

This wall-mounted sideboard is an incredibly flexible piece of furniture. It can be positioned low to support a flatscreen TV, higher to become a wall- mounted desk with storage or higher still as a practical hall table. Ideal for limited space or just changing needs.

Designer
John and Coby (Melb)

Materials
Birch plywood with your choice of Oak, Walnut or Maple veneer

Price

1200L - $1,950

1800L - $2,750

This wall-mounted sideboard is an incredibly flexible piece of furniture. It can be positioned low to support a flatscreen TV, higher to become a wall- mounted desk with storage or higher still as a practical hall table. Ideal for limited space or just changing needs.

Designer
John and Coby (Melb)

Materials
Birch plywood with your choice of Oak, Walnut or Maple veneer

Price

1200L - $1,950

1800L - $2,750

The RAK was inspired by the philosophy and wire models developed by Frank and Lillian Gilbreth as part of their Time and Motion studies conducted in the early part of the 20th century. The RAK coat stand is made using FSC approved Birch plywood and the form is cut using a CNC router.

Designer
Berto Pandolfo

Materials
Birch Plywood

Dimensions
1700mm H x 500mm W

Price
$550

KAP wall hook (2008). The KAP wall hook is a derivative of the RAK coat stand and was developed to satisfy the need to hang items in places where a RAK would not fit.

The KAP coat stand is made using FSC approved Birch plywood and the form is cut using a CNC router.

Berto Pandolfo

Materials
Birch Plywood

Dimensions
125mm x 120mm x 60mm

Price
$39

The UCCIO outdoor range has been designed to be a solid chair and side table to last the Australian seasons. Made in Melbourne, using automotive wire forming machines, and hand assembled and welded. These pieces are also designed to be wind and weather resistant, wont get blown around in a storm, and are low maintenance for the backyard or balcony.

Designer
Daniel Barbera

Price
UCCIO lowchair - $490
UCCIO sidetable - $311

The UCCIO outdoor range has been designed to be a solid chair and side table to last the Australian seasons. Made in Melbourne, using automotive wire forming machines, and hand assembled and welded. These pieces are also designed to be wind and weather resistant, wont get blown around in a storm, and are low maintenance for the backyard or balcony.

The UCCIO lowchair has a solid rod frame, cnc formed and is zinc electroplated, then powdercoated in any standard color.

Designer
Daniel Barbera

Price
UCCIO lowchair - $490

The UCCIO outdoor range has been designed to be a solid chair and side table to last the Australian seasons. Made in Melbourne, using automotive wire forming machines, and hand assembled and welded. These pieces are also designed to be wind and weather resistant, wont get blown around in a storm, and are low maintenance for the backyard or balcony.

The UCCIO lowchair has a solid rod frame, cnc formed and is zinc electroplated, then powdercoated in any standard color.

Designer
Daniel Barbera

Price
UCCIO lowchair - $490

The UCCIO outdoor range has been designed to be a solid chair and side table to last the Australian seasons. Made in Melbourne, using automotive wire forming machines, and hand assembled and welded. These pieces are also designed to be wind and weather resistant, wont get blown around in a storm, and are low maintenance for the backyard or balcony.

Designer
Daniel Barbera

Price
UCCIO lowchair - $490
UCCIO sidetable - $311

The UCCIO outdoor range has been designed to be a solid chair and side table to last the Australian seasons. Made in Melbourne, using automotive wire forming machines, and hand assembled and welded. These pieces are also designed to be wind and weather resistant, wont get blown around in a storm, and are low maintenance for the backyard or balcony.

The UCCIO lowchair has a solid rod frame, cnc formed and is zinc electroplated, then powdercoated in any standard color.

Designer
Daniel Barbera

Price
UCCIO lowchair - $490

The UCCIO outdoor range has been designed to be a solid chair and side table to last the Australian seasons. Made in Melbourne, using automotive wire forming machines, and hand assembled and welded. These pieces are also designed to be wind and weather resistant, wont get blown around in a storm, and are low maintenance for the backyard or balcony.

The UCCIO sidetable has a mildsteel solid rod base electroplated zinc, while the top is stainless steel. Available in any standard powdercoat colour.

Designer
Daniel Barbera

Price
UCCIO sidetable - $311

Mitsy Stool is constructed from folded sheet material. Tongue and Groove stock the Mitsy Stool in fully recyclable cardboard with a custom graphic print in a selection of colours. The stool has no glue or mechanical fixings, making it easy to dismount, store, move and re-construct. A flexible piece of furniture for a flexible lifestyle.

Designer

Anthony Dann

Material

Cardboard. Either plain or with custom graphic print.

Size

Approx 450 W x 450 D x 450 H

Price

$45 plain

$55 printed

Mitsy Stool is constructed from folded sheet material. Tongue and Groove stock the Mitsy Stool in fully recyclable cardboard with a custom graphic print in a selection of colours. The stool has no glue or mechanical fixings, making it easy to dismount, store, move and re-construct. A flexible piece of furniture for a flexible lifestyle.

Designer

Anthony Dann

Material

Cardboard. Either plain or with custom graphic print.

Size

Approx 450 W x 450 D x 450 H

Price

$45 plain

$55 printed

Peter & Paul shelving units are handmade in Australia by Lex Stobie. Sides of shelving units can be made in American Oak or Blackwood. Shelves are made from Australian Hoop Pine Ply. 3x shelf and 6x shelf versions are available.

Designer
Lex Stobie

Materials
American Oak & Australian Hoop Pine Ply

Blackwood & Australian Hoop Pine Ply

Dimensions
3 x Shelves - 1165 W x 800 H x 285 D

Price

3 x Shelves - $695

Peter & Paul shelving units are handmade in Australia by Lex Stobie. Sides of shelving units can be made in American Oak or Blackwood. Shelves are made from Australian Hoop Pine Ply. 3x shelf and 6x shelf versions are available.

Designer
Lex Stobie

Materials
American Oak & Australian Hoop Pine Ply

Blackwood & Australian Hoop Pine Ply

Dimensions
3 x Shelves - 1165 W x 800 H x 285 D

Price

3 x Shelves - $695

Peter & Paul shelving units are handmade in Australia by Lex Stobie. Sides of shelving units can be made in American Oak or Blackwood. Shelves are made from Australian Hoop Pine Ply. 3x shelf and 6x shelf versions are available.

Designer
Lex Stobie

Materials
American Oak & Australian Hoop Pine Ply

Blackwood & Australian Hoop Pine Ply

Dimensions

6 x Shelves - 1165 W x 1950 H x 285 D

Price

6 x Shelves - $1495

Peter & Paul shelving units are handmade in Australia by Lex Stobie. Sides of shelving units can be made in American Oak or Blackwood. Shelves are made from Australian Hoop Pine Ply. 3x shelf and 6x shelf versions are available.

Milca is a new range of handcrafted furniture from the hands, and imagination, of the team at Arteveneta. Elegant, simple, sparse, precise, contemporary, timeless, handmade. What began as a beautifully crafted stool for children has evolved into so much more. We're not about to tell you all of it's uses. The fun is discovering those on your very own.

Designer

Arteveneta

Materials

Timber

Size

Milca Cafe Table (three legs) - 800mm dia x 730mm high

Milca Dining Table (four legs) - 1200mm dia x 730mm high

Milca Adult's Stool (three legs) - 260mm seat dia x 450mm high

Price

Milca Cafe Table - $1760ea

Milca Dining Table - $2250ea

Milca Adult's Stool - $295ea

Milca is a new range of handcrafted furniture from the hands, and imagination, of the team at Arteveneta. Elegant, simple, sparse, precise, contemporary, timeless, handmade. What began as a beautifully crafted stool for children has evolved into so much more. We're not about to tell you all of it's uses. The fun is discovering those on your very own.

Milca is a new range of handcrafted furniture from the hands, and imagination, of the team at Arteveneta. Elegant, simple, sparse, precise, contemporary, timeless, handmade. What began as a beautifully crafted stool for children has evolved into so much more. We're not about to tell you all of it's uses. The fun is discovering those on your very own.

Designer

Arteveneta

Materials

Timber

Milca Adult's Stool (three legs) - 260mm seat x 450mm high

Price

Milca Adult's Stool - $295ea

Milca is a new range of handcrafted furniture from the hands, and imagination, of the team at Arteveneta. Elegant, simple, sparse, precise, contemporary, timeless, handmade. What began as a beautifully crafted stool for children has evolved into so much more. We're not about to tell you all of it's uses. The fun is discovering those on your very own.

Designer

Arteveneta

Materials

Timber

Size

Milca Kids Table (three legs) - 500mm dia x 550mm high

Milca Kid's Stool (three legs) - 200mm seat dia x 300mm high

Price

Milca Kid's Table - $660ea

Milca Kid's Stool - $159ea

The Leatherboy Stool displays a confident, hand-made quality in materials and the subtle joinery detail of the exposed bridle joint. The angles and dimensions have been refined, the process established and the product well tested over two years in the harshest of cafe environments. Leatherboy can be custom made in a variety of timber species and upholstery colours.

Designer

John Beckwith

Materials

Timber Options: American Oak, Victorian Ash, Walnut or Blackwood

Leather Options: Black or Brown (other colours available on request) with grey marle felt detailing.

Size

Custom made - height can vary according to customer requirements.

Image shows seat dimensions: 720mm H x 370mm W x 325mm D

Price

$575 each

The Leatherboy Stool displays a confident, hand-made quality in materials and the subtle joinery detail of the exposed bridle joint. The angles and dimensions have been refined, the process established and the product well tested over two years in the harshest of cafe environments. Leatherboy can be custom made in a variety of timber species and upholstery colours.

Designer

John Beckwith

Materials

Timber Options: American Oak, Victorian Ash, Walnut or Blackwood

Leather Options: Black or Brown (other colours available on request) with grey marle felt detailing.

Size

Custom made - height can vary according to customer requirements.

Image shows seat dimensions: 720mm H x 370mm W x 325mm D

Price

$575 each